Address
Building A1, Runteng Industrial Park, No. 4 Xishan Road, Longteng Community, Shiyan Subdistrict, Bao'an District, Shenzhen 518000, China
Work Hours
Monday to Friday: 7AM - 7PM
Weekend: 10AM - 5PM
JHIMS BL18 Vertical 4-Axis LED Display Cabinet Screw Fastening Machine
Request a quote
BL18 — Vertical 4-Axis LED Display Cabinet Screw Fastening Machine
±0.02mm Accuracy3 Fastening + 1 Feed Axis1024×1024mm Max FixtureM4×10 Screws1,000 Programs
- 🔁 Dual-fixture three-station design — a cabinet is always under the driver
- 📷 Camera-assisted alignment with ±0.02mm positioning accuracy
- 🏭 TBI · HIWIN · AirTAC · Leadshine · Yankong components · ISO 9001 · Global after-sales
AUTOMATIC LED CABINET SCREW FASTENING MACHINE
JHIMS BL18 Vertical 4-Axis LED Display Cabinet Screw Fastening Machine
A cabinet is fastened while the next one is being loaded — so output follows the fastening program, not the operator’s hands. ±0.02 mm positioning accuracy, camera-assisted alignment and 1,000 stored programs, engineered and built by JHIMS in Shenzhen.
ISO 9001 Certified
CE Compliant
Serving 2,456+ Clients in 30+ Countries
36 R&D Engineers
Est. 2012 — 12+ Years of Excellence
Automotive Tier-1 Supplier
Medical Device Manufacturer
Consumer Electronics OEM
Industrial Automation Leader
LED Lighting Manufacturer
Medical Device Manufacturer
Consumer Electronics OEM
Industrial Automation Leader
LED Lighting Manufacturer
Explore JHIMS Solutions: The BL18 sits in our screw fastening systems range alongside the ZM320 desktop four-axis screw fastening machine, the ZM500 screw tightening and removal machine and the 2P-LXS500 LED module screw tightening machine. For the wider line, see solder paste printers, reflow ovens and pick and place machines. Industry context: LED manufacturing, consumer electronics and industrial electronics. Buying resources: risk-managed procurement guide, buying guides, maintenance guide, troubleshooting guides and FAQ. Company: company profile, why choose us, certificates, after-sales service, warranty policy, technical support, global partners and contact.
Pain Points & JHIMS Solutions
Common LED Cabinet Assembly Challenges
- Manual screw driving limits cabinet output.
- Loose or missed screws emerge only at final inspection.
- Cabinet changeovers require manual marking and teaching.
- Tray picking slows cycles and drops screws.
- Fetching the next box interrupts fastening.
- Thickness changes require hardware adjustment.
- Operator fatigue changes torque and sequence.
JHIMS BL18 Automation Solutions
- Dual fixtures alternate loading and fastening across three stations.
- ±0.02mm positioning accuracy with camera-assisted alignment.
- 1,000 stored programs for cabinet changeovers.
- One X-axis feeder blows screws to the head.
- Extended Z-axis stroke accommodates different module thicknesses.
- Single-head suction picks and drives screws automatically.
- Maximum fixture: 1024×1024×105mm.
Product Overview
The JHIMS BL18 fastens LED display cabinets while the next cabinet is loaded. Dual fixtures alternate across three stations, combining camera-assisted alignment, ±0.02mm positioning accuracy and M4×10 screws with flat and spring washers.
- Motion control card + teach pendant — program storage and station sequence control
- Three fastening axes + one feed axis — independent motion on X, Y and Z with a dedicated feed axis
- Camera-assisted alignment — locates the cabinet before the first screw
- Single-head suction fastening — the nozzle picks and holds each screw before driving
- Pneumatic blowing feeder — one feeder travelling on the X-axis
- Dual fixture, max 1024×1024×105 mm — two fixtures alternate between loading and fastening
Extended Z-axis travel accommodates different module thicknesses. The controller stores 1,000 programs for cabinet changeovers.
Key Features
🔄
Fasten While You Load — Dual Fixtures, Three Stations
Station 2 fastens one cabinet while Stations 1 and 3 handle assembly and loading.
🎯
±0.02 mm Positioning Accuracy
Three fastening axes hold ±0.02 mm positioning accuracy.
📷
Camera-Assisted Alignment — No Manual Marking
The camera locates the cabinet before fastening starts.
↕️
Extended Z-Axis Stroke — One Machine, Many Thicknesses
The extended Z-axis stroke accommodates modules of different thicknesses.
💾
1,000 Stored Programs — Change Model in Seconds
Store 1,000 cabinet programs and recall the matching screw pattern.
💨
Pneumatic Screw Feed That Travels With the Head
One X-axis feeder pneumatically delivers M4×10 screws with flat and spring washers.
🔩
Single-Head Vacuum Pick — One Screw, Every Cycle
A suction nozzle holds each screw for the servo electric screwdriver.
⚙️
TBI Ball Screw + HIWIN Linear Guide
TBI ball screws and HIWIN linear guides carry the motion system.
🎮
Teach Pendant Control — Setup Without a Programmer
Operators set fastening positions with a motion control card and handheld teach pendant.
🛠️
1-Year Warranty, 24/7 After-Sales, 30-Minute Response
1-year warranty, 30-minute response, and technician dispatch within 24 hours in the Pearl River Delta.
Technical Specifications
| Parameter | Specification | Parameter | Specification |
|---|---|---|---|
| Model | BL18 | Screw Specification | M4×10 (with flat & spring washers) |
| Feeding Method | Feeder pneumatic blowing | Number of Axes | 3 fastening axes + 1 feed axis |
| Positioning Accuracy | ±0.02mm | Fastening Method | Single-head suction-type fastening |
| Alignment Method | Camera-assisted alignment | Max. Compatible Fixture | Max. 1024×1024×105mm |
| Overall Dimensions (L×W×H) | 4700×1800×1500mm | Weight | Approx. 550kg |
| Control Method | Motion control card + teach pendant | Power Supply | AC220V, 50Hz |
| Operating Air Pressure | 0.55–0.65MPa | Program Storage | 1,000 programs |
Machine Configuration — Premium Global Components
Every JHIMS BL18 is built with world-class components. We source only from industry-leading brands to ensure long-term reliability and precision.
TBI
🇹🇼 Taiwan
Ball Screws
HIWIN
🇹🇼 Taiwan
Linear Guides
AirTAC
🇹🇼 Taiwan
Pneumatic Components
Weinview
🇹🇼 Taiwan
Touch Screen / HMI
Leadshine
🇨🇳 China
Servo Motors
Yankong
🇨🇳 China
Electric Screwdriver
Custom
🏭 JHIMS
Motion Control Card
Applications & Industries
The JHIMS BL18 automates LED cabinet fastening with dual fixtures, pneumatic clamping and camera-assisted alignment.
🖥️
LED Display Cabinets
🔲
LED Display Modules
📦
Electronics Enclosures
🏭
Cabinet Assembly Lines
💡
LED Lighting Fixtures
⚙️
Sheet-Metal Box Assembly
The 1,000-program controller supports multiple cabinet jobs. Extended Z-axis travel accommodates different module thicknesses, with a maximum compatible fixture of 1024×1024×105mm.
In-Depth Knowledge Hub
Industry Solutions for LED Cabinet Assembly
High-Volume LED Cabinet Assembly
Dual fixtures alternate cabinet preparation and fastening across three stations.
Mixed Module and Cabinet Production
The extended Z-axis stroke accommodates assembled box modules of different thicknesses.
Multi-Model Changeover
The controller stores up to 1,000 cabinet programs for recall.
Coping With Cabinet Size Variation
Camera-assisted alignment supports ±0.02mm positioning accuracy.
Scaling Up for Peak Season
Operators prepare one cabinet while the other is fastened at Station 2.
Vertical Four-Axis Screw Fastening Technology Guide
Four-Axis Layout: 3 Fastening + 1 Feed
Three fastening axes and one feed axis work with a single fastening head.
How Camera Alignment Works in Practice
The camera positions the cabinet before its fastening program starts.
The Pneumatic Screw Delivery Path
One X-axis feeder pneumatically delivers M4×10 screws with flat and spring washers.
Single-Head Vacuum Fastening Explained
A suction head presents each screw to the servo electric screwdriver.
Storing and Recalling 1,000 Programs
A motion control card and teach pendant support 1,000 stored programs.
How ±0.02 mm Is Held Across a Cabinet
TBI ball screws, HIWIN linear guides and Leadshine servo motors support ±0.02mm positioning accuracy.
Manufacturing and Quality Practices
The Three-Station Operating Rhythm
Station 2 fastens while Stations 1 and 3 handle assembly and loading.
Pneumatic Clamping and Safe Start
A pneumatic valve clamps the box before transfer; working air pressure is 0.55–0.65MPa.
Daily Care Checklist
Installation and operation training covers routine machine care.
Spare Parts to Keep on Hand
The Z-axis assembly includes the suction nozzle, screw-handling cylinders and servo electric screwdriver.
Pre-Shipment Acceptance Checks
Machine dimensions are 4700×1800×1500mm, weight approximately 550kg, and power supply AC220V, 50Hz.
How the Three-Station Cycle Works
Station 2 fastens; Stations 1 and 3 handle assembly and loading.
📦
Incoming Cabinets
Incoming Cabinets
→
🔩
BL18 Screw Fastening
⭐ This Product
BL18 Screw Fastening
⭐ This Product
→
🔍
Inspection
Inspection
→
⚙️
Assembly
Assembly
→
📦
Packaging
Packaging
01 Assemble at Station 3 — Assemble the cabinet and engage pneumatic clamping.
02 Fixture Shifts Left — The right fixture enters Station 2 for fastening.
03 Load the Next Box — Assemble the next cabinet at Station 1 during fastening.
04 Fixture Shifts Right — Remove the finished cabinet at Station 3.
05 Cycle Repeats — Load Station 3 while the left fixture is fastened.
Manual Screw Fastening vs. JHIMS BL18 — The Numbers Don’t Lie
| Metric | Manual Fastening | JHIMS BL18 | Advantage |
|---|---|---|---|
| Operator involvement per cabinet | Load, pick up screwdriver, drive every screw, unload | Load, clamp, unload | One operator, two fixtures |
| Screw delivery | Manual pick-up from a tray or bin | Feeder on X-axis, pneumatic blowing | No hand pick-up |
| Positioning | Freehand, depends on operator marks | ±0.02mm with camera-assisted alignment | ±0.02mm Repeatable |
| Changeover between variants | Re-mark and re-position by hand | Recall one of 1,000 stored programs | 1,000 Programs |
| Idle time between cabinets | Stops fastening to fetch the next box | Other fixture is loaded during fastening | No idle time |
| Cycle consistency | Varies with fatigue and access angle | Same torque and sequence on every screw | Consistent |
| Pace per screw | Operator-dependent | ≈2.5 s per screw (customer-reported) | ≈1,440 screws/hour |
ROI Calculator — See Your Payback Period
Enter your current production parameters to calculate how quickly the JHIMS BL18 pays for itself.
Built, Wired and Tested Before It Ships
Every BL18 is assembled, wired and run in our Shenzhen plant before it is crated for export. What you see below is the machine itself, the control cabinet behind it, the screw feeder that keeps it running, and how it leaves the factory.
Assembled and powered up — dual fixtures either side of the gantry
Control cabinet — servo drives and motion control card, wired and tested
Automatic screw feeder — pneumatic blowing feed with pressure regulator
Crated and loaded — export packing before shipment
Product Videos — See the BL18 in Action
Watch the JHIMS BL18 performing real-world production tasks. All videos are hosted on YouTube for fast, reliable streaming worldwide. Every procedure on these videos is also written out, step by step, in the 19-part BL18 operator video guide — power-on and language, coordinate teaching, feeder and nozzle faults, camera calibration, torque setup and maintenance.
Automatic LED module assembly — screw fastening and tightening system
LED display module and cabinet screw assembly demo
LED display cabinet screw assembly machine — short
LED display cabinet automatic screw fastening — short
CUSTOMER SUCCESS STORIES
Delivered to LED Display Manufacturers Worldwide
Real JHIMS deliveries behind the BL18 — a BL18 vertical four-axis machine shipped to Argentina, a screw tightening machine packed for Saudi Arabia, and LED module lines in Shenzhen and the TCL group.
LED DISPLAY CABINETS · ARGENTINABL18 Vertical 4-Axis Screw Fastening Machine
One BL18 shipped in August 2026 for LED cabinet assembly, with dual fixtures, camera-assisted alignment, M4×10 screws and a maximum fixture size of 1024×1024×105mm.
1Unit Delivered
Aug 2026Shipped
±0.02mmPositioning Accuracy
- Vertical 4-axis configuration, 3 fastening axes + 1 feed axis
- ±0.02mm positioning accuracy
- 1,000 stored programs for cabinet variants
LED DISPLAY · SAUDI ARABIAScrew Tightening on an LED Display Line
A screw tightening machine supplied for LED display cabinet assembly in Saudi Arabia.
0.9sPer Screw
5,000Screws per Hour
-50%Assembly Time
- Automated screw driving for LED cabinets
- Shipped and commissioned from Shenzhen
PRODUCTION EFFICIENCY · TCL85% Faster Changeover, 30% More Throughput
A TCL production line cut changeover time by 85% and increased throughput by 30% with JHIMS automation.
85%Faster Changeover
30%More Throughput
<5 minChangeover Time
- Changeover time reduced by 85%
- Throughput up 30%
LED DISPLAY · SHENZHEN145K CPH LED Display Production with YSM40R
Two YSM40R machines achieved a verified placement rate of 145,000 CPH per machine for a Shenzhen LED display manufacturer.
145,000 CPHPlacement Rate per Machine
2YSM40R Units
33%Shorter Production Line
Frequently Asked Questions
🔧 Technical Questions
M4×10 with combined flat and spring washers. Standard configuration is customised per customer requirements.
Three fastening axes plus one feed axis, with single-head suction fastening and pneumatic screw delivery.
±0.02mm, with camera-assisted alignment before fastening.
The maximum compatible fixture is 1024×1024×105mm. Different cabinet sizes use different fixtures.
Up to 1,000 programs for cabinet and module screw patterns.
Operating air pressure is 0.55–0.65MPa. Power supply is AC220V, 50Hz.
⚙️ Operation & Maintenance
Station 2 fastens screws. Stations 1 and 3 handle box assembly and loading.
Yes. One fixture is loaded while the other cabinet is fastened.
The operator assembles the box at Station 3 and secures it with the pneumatic clamping valve.
The fixture assembly shifts left, bringing the right fixture to Station 2. The operator can assemble the next box at Station 1.
The fixture shifts right, returning the finished box to Station 3 for manual removal while Station 2 fastens the left-hand box.
The extended Z-axis stroke accommodates box modules of various thicknesses.
A motion control card and teach pendant.
Camera-assisted alignment positions the cabinet before fastening.
Yes. One feeder travels along the X-axis.
4700×1800×1500mm overall, weighing approximately 550kg.
Z-axis, screw-locking cylinder, servo electric screwdriver, suction nozzle, nail-feeding cylinder, nail-dropping cylinder and nail-receiving head.
TBI ball screw, Leadshine servo motor and HIWIN linear guide.
📦 Shipping & Support
1 year, with free maintenance and replacement for quality-related issues.
Response within 30 minutes. Technician dispatch: within 24 hours in the Pearl River Delta; outside the region, within 48 hours depending on the situation.
Yes. Technical staff train your operators and technicians on installation and operation.
Export crating by ocean freight. Machine dimensions: 4700×1800×1500mm; approximate weight: 550kg.
Yes. Personnel remain on standby 24 hours a day, 7 days a week, including weekends and public holidays.
💼 Commercial Terms
70% T/T deposit with the order, 30% T/T before shipment. Existing customers may use L/C at sight.
30 days is the standard lead time from order confirmation. Custom fixture sizes or additional stations can extend it, so the fixture is confirmed before the schedule is fixed.
About 2.5 seconds per screw as reported by the customer — roughly 1,440 screws per hour on a single fastening head at that pace. The operator loads the next cabinet while the machine fastens.
🧩 Components, Configuration & Service Details
The custom motion control card works with a teach pendant.
AirTAC supplies the pneumatic components. Working pressure is 0.55–0.65MPa.
Weinview supplies the touch screen.
Yankong supplies the electric screwdriver.
Machine body, X-axis, Z-axis, feeder, fixture, Y-axis and fixture moving bracket.
The Z-axis provides vertical positioning, with extended stroke for modules of various thicknesses.
It drives the screw at the fastening head.
The suction nozzle holds and presents each screw before driving.
It performs the pneumatic locking operation within the Z-axis assembly.
It handles the screw-feed stage within the Z-axis assembly.
It handles the screw-dropping stage within the Z-axis assembly.
It receives screws within the Z-axis screw-handling assembly.
It supports the fixture assembly as it moves left and right to present cabinets at Station 2.
TBI supplies the ball screw for motion transmission; HIWIN supplies the linear guide for guided movement.
No. Leadshine supplies the servo motor; Yankong supplies the electric screwdriver.
The configuration covers the screw and washer combination. The listed M4×10 screw includes flat and spring washers; custom configurations follow customer requirements.
Senior technical specialists complete formal company training and pass qualification examinations before deployment.
The after-sales team communicates with the customer and attends within the requested timeframe.
One X-axis feeder blows screws to the head. The suction nozzle presents each screw for the servo electric screwdriver.
No. Maximum fixture: 1024×1024×105mm. Overall machine dimensions: 4700×1800×1500mm. Approximate weight: 550kg.
LEARNING CENTER
Knowledge Center — Expert Resources
Practical BL18 guides and case studies covering operation, maintenance and line integration.
Reference videos: BL18 LED Display Cabinet Screw Fastening Machine Demo; LED Display Cabinet Screw Assembly Machine | JHIMS; LED Display Cabinet Automatic Screw Fastening Machine | JHIMS BL18; Automatic Screw Tightening Machine for LED Module Enclosures — with shipment footage.
| Weight | 550 kg |
|---|---|
| Dimensions | 4700 × 1800 × 1500 mm |